BCMFY - BOSTIK M890, REACTIVE BONDING SYSTEM
- MSDS: BCMFY
- Manufacturer: BOSTIK DIV USM CORP EMHART INDUSTRIES INC
- Product Name: BOSTIK M890, REACTIVE BONDING SYSTEM
- National Stock Number: 8040-00N006210
Product Identification
Product ID:BOSTIK M890, REACTIVE BONDING SYSTEM
MSDS Date:01/01/1987
FSC:8040
NIIN:00N006210
MSDS Number: BCMFY
Responsible Party
MIDDLETON, MA 01949
US
Cage: EO452
Contractor
Telephone: 508-777-0100
Cage: 70707
Ingredients
0-50
Fraction By Weight: 25.0%
ACGIH TLV: 10 PPM
10-70
Fraction By Weight: 40%
ACGIH TLV: NOT KNOWN
2,6-DI-TERT-BUTYL-P-CRESOL
CAS: 128-37-0
RTECS: GO7875000
Fraction By Weight: 0.49%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3; 9192
1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE)
CAS: 80-15-9
RTECS: MX2450000
Fraction By Weight: 1.0%
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Effects of Overexposure:IRRITATION OF EYE,SKIN & MUCOUS MEMBRANE.
VAPOR: HEADACHE,NAUSEA.
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT A PHYSICIAN. SKIN:
WIPE OFF IMMEDIATELY,WASH WITH SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF NEEDED,CONSULT PHYSICIAN.
Fire Fighting
Flash Point:50F/10C (SCC)
Lower Limits:1.7
Upper Limits:8.7
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAIN BREATH APP.
Unusual Fire/Explosion Hazard:CONTAINS 1% CUMENE HYDROPEROXIDE
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION. PROVIDE GOOD
VENTILATION. AVOID SKIN CONTACT & INHALATION OF VAPORS. SOAK UP
SPILL WITH EARTH OR SAND. RECOVER IN CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL LOCATION (77F/24C OR
BELOW) AWAY FROM SUNLIGHT & OTHER SOURCES OF HEAT/IGNITION. KEEP
CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:USE WITH ADEQUATE VENTILATION,AND IN AREAS FREE OF
SPARKS & FLAMES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:POLYETHYLENE
Eye Protection:SAFETY GOGGLES,FACE SHILD
Other Protective Equipment:SAFETY SHOWER,EYE BATH,PROTECTIVE CLOTHING.
Supplemental Safety and Health
MSDS FM MFR DATED:8/17/84;PER MFH PT 90F SCC PER MFR. .
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:212F/100C
Vapor Pres:23
Vapor Density:3.45
Spec Gravity:1.02
Solubility in Water:APPRECIABLE
Appearance and Odor:CLOUDY WHITE TO PALE YELLOW LIQUID,UNPLEASANT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT,SPARKS,FLAMES
Hazardous Decomposition Products:CO,CO*2,HYDROGEN CHLORIDE & OTHER
TOXIC FUMES.
Conditions to Avoid Polymerization:TEMPERATURES ABOVE 100F.
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.